New Products
Atlantis 1:193rd Space Force Orbital Rocket (Willey Ley)
Only a few left!
Atlantis 1:193rd Space Force Orbital Rocket (Willey Ley)
This classic kit has never been reissued. Come molded in 4 colors! Includes detailed instructions and willy ley booklet. A research, 3-stage, manned rocket for controlled orbital flight.The First stage is a large vertically launched twin rocket engine with wings, and has a pilot and co-pilot. This stage carries the 2nd and 3rd stages 'piggy-back'. After burn-out, the 1st stage is landed, fitted with jet-engine pods and flown back to the launching point. The 2nd stage is an expendable rocket for boosting the 3rd stage into orbit.
The 3rd stage is also fitted with wings and rocket power for re-entry and landing, and has a pilot in the transparent cabin. Model includes 3-stage rocket with transparent cabin, dropable fuel tanks, and retractable landing gear, launching pad, 5 figures and decals. All parts of the rocket can be separated. Molded in 3 colors and clear.
Coming Late September 2024
Moebius 2001 Space Station 1/2600th Scale
Only a few left!
Moebius 2001 Space Station 1/2600th Scale
This 1:2600 scale kit features both the completed ring and the portions of the ring that are still under construction, just as seen in the movie. Even parts of the seemingly complicated truss structure that are still being completed are skilfully divided into parts for smooth assembly.
A special display stand is included, and includes an in scale Orion!
Features:
Plastic model kit that requires assembly, glue and paint
Approximately 35cm diameter when completed
Orion is approximately 3cm long when completed
The kit is 13.5 inches in diameter.
A Heavy Kit (2 Kilo's)
HORIZON MODELS 2006 1/72 Atlas Agena Early NASA Space Rocket
Only a few left!
HORIZON MODELS 2006 1/72 Atlas Agena Early NASA Space Rocket
Parts are supplied to allow the model to be built with the Augmented Target Docking Adaptor (ATDA) or as Agena Target Vehicle (ATG).
Here is what Horizon Models has to say about this package:
Newly tooled Agena Upper Stage
One of two payloads can be displayed:
Agena Target Vehicle (ATV)
Augmented Target Docking Adaptor (ATDA)
Atlas rocket features separately moulded pressure & fuel lines
Finely engraved recessed panel lines
Parts and decals included to build various Atlas-Agena missions
X-Plus Seated Metropolis Maria Robot 1/8th scale.
X-Plus Seated Metropolis Maria Robot 1/8th scale.
Introducing X PLUS's Maschinenmensch Seated Ver. Plastic Model Kit: A Tribute to Film History!
Transport yourself to the world of Fritz Lang's 1927 masterpiece, "Metropolis," with our faithful reproduction of the iconic Maschinenmensch. This ⅛ scale model pays homage to Maria in her most iconic pose, capturing the allure and essence of this pivotal cinematic character.
Moulded in a striking beige-silver color, reminiscent of the original robot material, our model features evocative text and the unmistakable "HEL" inscription in the iconic Metropolis typeface.
But that's not all. With innovative inner body parts, you can recreate the unforgettable seated pose, complete with transparent aura rings and intricate cables, bringing you closer to the authentic portrayal of Maschinenmensch.
Experience the magic of "Metropolis" anew with our latest Maschinenmensch Plastic Model Kit—a testament to cinematic legacy.
New in stock!
X-PLUS 1/35 Scale Jurassic ParkⅢ Spinosaurus Plastic Model Kit
X-PLUS 1/35 Scale Jurassic ParkⅢ Spinosaurus Plastic Model Kit
The Arrival of a New Predator"
From the 2001 "Jurassic Park III," the Spinosaurus left a powerful impression as the "dinosaur that defeated the T-REX" and we have brought this large, strong, and ferocious theropod to life in a 1/35 scale plastic model kit.
"Capturing Lifelike Expressions Unique to Plastic Models"
As this is a plastic model kit that offers both lightweight construction and durability, we've carefully selected dynamic poses that effectively convey a sense of 'motion.' Notably, the highlight is the
challenging single-legged stance, a pose often deemed challenging for polystatues or PVC figures.
"Impressive 1/35 Scale"
The kit includes a diorama base that draws inspiration from the movie's climactic scene. When you compare the size of the sunken crane to that of the Spinosaurus, you'll gain a profound
appreciation for the sheer magnitude of this carnivorous dinosaur. Take note of the remarkable portrayal of size, a characteristic unique to scale models.
New in stock!!
Fantastic Plastic Von Braun ROUND-THE -MOON SHIP
Only a few left!
In 1953, Collier's Magazine published a series of wildly popular articles depicting how America planned to venture into space, to the moon and ultimately to Mars in the latter half of the 20th century. Lavishly illustrated by artist Chesley Bonestell, the missions -- and spacecraft -- depicted were largely the proposals of Dr. Werner Von Braun, the German-born aerospace genius behind the V-2 ballistic missile and later NASA's own Saturn V moon rocket.
In Von Braun's scenario, a manned mission landing would be preceded by a series of manned survey missions to look for viable landing sites. These three-man "Round-the-Moon Ships" would launch from one of Von Braun's proposed wheel-shaped space stations and then travel to the moon along a trajectory that would have them momentarily captured by the lunar gravity and then flung back to Earth. (This "free return" trajectory was what the ill-fated Apollo 13 crew would use to return to Earth in April 1970.) No landing would be attempted during these survey missions.
In 1958, Lindberg Line Models liberally borrowed Von Braun's concept -- uncredited -- when it produced its plastic "U.S. Moon Ship" kit. But no other company has produced the O.G. "Round-the-Moon Ship" in kit form -- until now!
This 1:144 kit was produced exclusively for Fantastic Plastic Models by Central Replication and Production (formally Millennium Models International). Featuring 62 resin cast and 3D printed parts, our kit accurately reproduces Von Braun's original design in painstaking detail. The finished model is 8 inches long.
NEW IN STOCK
Atlantis 1/13th scale SABER TOOTH TIGER (Ex Aurora)
Only a few left!
Atlantis 1/13th scale SABER TOOTH TIGER (Ex Aurora)
Reissue of the Aurora classic from the early 70's. Packaged in an Aurora style square box.
Features:
1/13 Scale
Movable Parts
Modular Terrain Bases
Additional parts and accessories
Made From The Original Moulds
New in Stock!
Atlantis 1/13th scale Cave Bear (Ex Aurora)
Only a few left!
Atlantis 1/13th scale Cave Bear (Ex Aurora)
1:13 Prehistoric Scenes Cave Bear
Reissue of the Aurora classic from the early 70's. Packaged in an Aurora style square box.
Features:
1/13 Scale
Movable Parts
Modular Terrain Bases
Additional parts and accessories
Made From The Original Moulds
RJM Flash Gordon War Rocket AJAX
Sold out
RJM Flash Gordon War Rocket AJAX - Exclusive to us!
At last a kit (10" Long) of this long overdue classic design.
Designed by Robert James & produced by Peter Frith for us.
Download Instructions from the Robert James Facebook Page.
Display Model by Andy (Shovels) Kent.
Polar Lights Enterprise/Reliant Aztec decals 1:1000 scale
Only a few left!
Polar Lights Enterprise/Reliant Aztec decals 1:1000 scale
New Aztec decals for the 1:1000 scale Refit Enterprise and Reliant models. Four sheets of decals with Aztek patterns for both kits. Also includes pinstripes and individual numbers and letters for custom ship registries.
New in stock!
MENG MMS-014&MMS-011&MMS-013 HARKONNEN & ATREIDES ORNITHOPTER & SPICE HARVESTER
Only a few left!
MENG MMS-014&MMS-011&MMS-013 HARKONNEN & ATREIDES ORNITHOPTER & SPICE HARVESTER
Planet Arrakis - this is the sacred land where mankind yearns for the spice and the stage for a space opera interwoven with political intrigue, betrayal, fear, hatred, hope and dreams. Across the vast expanse of its desert, whether it's the busy and cautiously operating spice harvesters or the ornithopters flying in the sky, they vividly showcase the unique allure of Dune. Now, let's explore the exquisite details of MENG's new MMS-011 Dune Atreides Ornithopter, MMS-013 Dune Spice Harvester, and MMS-014 Dune Harkonnen Ornithopter kits with the strong support from Legendary Pictures, .
Set of 3 Kits!!
X-Plus Revenge of the Creature 1/8th
X-Plus Revenge of the Creature 1/8th
After being captured and displayed as a sideshow attraction in the ocean harbour oceanarium in Florida, the creature, is determined to escape and seek his retribution.
This model is a motif inspired by the memorable scene in the first sequel to Creature from the Black Lagoon in which the captured creature can be seen chained up in a large aquarium. Some of the features of this kit are as follows:
Meticulously Sculpted Hands
Hands so symbolic that they can be repeatedly seen throughout the film. Their subtle details can clearly be seen in this highly detailed reproduction.
A Head that Stays True to the Source Material
Note the details of this version from Revenge of the Creature, the second instalment in a three-part series, with its distinctive eyes and delicately formed gills.
Lively Fish
This kit also comes with some of Florida’s lively inhabitants, the French Angelfish seen swimming in the tank with the captured creature.
Realistic Diorama
Utilize the diorama base to enjoy a motif reminiscent of the flourishing underwater environs of Florida.
Arriving November 30th
Aoshima KR-06 Knight Rider K.I.T.T. (Season One)- Working LED scanner & Voice Module!
Only a few left!
Aoshima 1/24th "Knight Rider" model kit with real working LED scanner and KITT voice module! Probably the most awesome Knight Rider model ever. Voice unit says 5 different phrases from the dubbed japanese version of the show. A detailed kit with decals for dash board displays and a choice of clear or tinted windows.
Green Hornet's Black Beauty - 1:25 scale Round 2/AMT
Green Hornet's Black Beauty - 1:25 scale Round 2/AMT-1271
This kit was created with authentic details inside and out. The outside has gadgets galore including the front gas gun, front rocket launchers, rear gun, reach rocket launchers, scanner (satellite), and rear brooms. The detailed interior includes an infra-green visor, a detailed dashboard compartment for the front phone, a front TV screen, a front speaker, a partition with main controls, a rear TV screen, a rear speaker & oscilloscope, and a rear phone. The model can be built with the gadget doors opened or closed. Other features include custom rims, centre & side grilles, double infra-green headlights or single lens headlight options, and multiple plate options. Also included are the full-colour water-slide decals and BONUS Green Hornet & Kato figures!
NEW IN STOCK!
NASA Artemis-1 Rocket - 1:200 scale - from Round 2/AMT
Only a few left!
NASA Artemis-1 Rocket - 1:200 scale - from Round 2/AMT
AMT celebrates mankind’s return to the moon with the ALL-NEW 1:200 scale NASA Artemis I Rocket model kit!
This plastic model kit offers the authenticity scale modelers have come to expect from AMT. Its 38 simple-to-assemble parts were painstakingly researched to provide many details present on the 322’-tall SLS (Space Launch System) when it launched on November 16, 2022. It showcases the Launch Abort System, Cryogenic Propulsion Stage, Launch Vehicle Stage Adapter, Core Stage, Solid Rocket Boosters, and its four RS-25 Engines. The water-slide decals provide NASA markings, small surface details, and tracking markings. Also included is a full-color booklet featuring information, fun facts, and photos about the Artemis I mission.
Features:
1:200 scale, skill level 2, paint & glue required
38 detailed parts
Moulded in white
Sturdy display base
Built size: 19 inches tall
New in stock!!
LINDBERG JOLLY ROGER SERIES: HEX MARKS THE SPOT – GLOW EDITION 1:12 SCALE MODEL KIT
Only a few left!
Hex Marks the Spot presents a fearsome diorama scene that is now molded in a GLOW-IN-THE-DARK plastic with plenty of detail that is fun to paint.
This kit in the Jolly Roger Series from Lindberg comes to life with the use of rubber band action that will pinpoint the location of the lost booty. With a set of detailed water-slide decals to really help set the mood. The kit’s eerie packaging is great to display on the shelf next to your finished model. This kit is part of the series of Jolly Roger pirate skeleton kits! Watch out because what ye find is not always what ye seek, when a HEX marks the spot.
Features:
1:12 scale, skill level 2, paint & glue required
45+ parts
Moulded in glow-in-the-dark plastic
Includes rubber band
Built size: 6 inches tall
AMT 1/32nd TIE FIGHTER (Larger Kit)(Special Import)
Only a few left!
AMT1341 1/32nd TIE FIGHTER (Studio Scale)
All new, larger model of the classic TIE Fighter from Star Wars A New Hope!
AMT proudly presents an ALL-NEW “Studio Series” large format plastic model kit of this iconic spaceship. This 13 ½” tall model features the intricate details present in the original filming miniatures along with a full cockpit that includes an Imperial pilot. Clear parts can be installed for a realistic look and assist the modellers who install custom lighting. A dome base with a metal support rod is included for a handsome display. A detailed replacement cap can be installed on the model when the display base is not used. Fine decals are included to decorate the ship inside and out and an easy-to-follow pictorial assembly guide is included.
Back in stock!!
Kronos One Klingon Cruiser- Star Trek VI (1/350th Scale)
Only a few left!
Kronos One Klingon Cruiser- Star Trek VI (1/350th Scale) Chancellor Gorkon's Flagship
Build the 1/350 scale Klingon Kronos One as seen in the sixth feature film, Star Trek: The Undiscovered Country. Add it to your collection today! The Klingon Kronos One is an authentically detailed kit that also features a dome base, amazing gold chrome service adornment water-slide decals, select photo-etch parts, and eye-catching packaging. A full detailed paint guide is on the side of the box tray. A plug-and-play Lighting kit is not included but is available separately. An additional photo-etch parts pack is also available separately.
Features:
1:350 scale, skill level 2, paint & glue required
142 parts
Moulded in a dark grey with some clear parts
Dome display base and metal support rod
Built size: 24 inches long
New In Stock!!
Polar Lights 1966 Batmobile w/Catwoman & Penguin Figures 1:24
Only a few left!
Brand new 1/25 scale plastic model kit of 1966 Batmobile "Bad Guy Getaway Edition" with Penguin and Catwoman Figures "Batman" (1966-1968) TV Series (Skill 2) 1/25 plastic model kit by Polar Lights.
Brand new box.
Crime computer.
Black vinyl tires.
Optional Bat-Ram.
Colorful decal artwork.
Vintage style packaging.
Bonus afterburner outlet.
Detailed big block engine.
Officially licensed product.
Chrome plated small parts.
Contains 90 detailed parts.
Penguin parasols and decals.
New In Stock
Atlantis 1:56 BOEING IM-P99 BOMARC MISSILE
Atlantis 1:56 BOEING IM-P99 BOMARC MISSILE (Ex Revell)
1/56 Scale. 2 crew figures included. The Atlantis version is moulded in Midnight Black and includes decals for 3 versions including Canadian markings. Officially Licensed with Boeing. Missile measures 10 inches long. Display model by Mat Irvine. Look for a full feature article on this kit in the May issue of Fine Scale Modeller Magazine. The built up shown is from our test shot we provided
Brand: Atlantis
Product Code: AMCH1806
Availability: New
Scale:1:56
Atlantis 1:128 U.S. SPACE MISSILES 36 MISSILE SET
Atlantis 1:128 U.S. SPACE MISSILES 36 MISSILE SET (Ex Monogram)
1:128 U.S. Space Missiles 36 Missile Set
Includes 36 missiles with display base detailed instructions and know your missiles educational booklet. Bottom of box can be used as a display for your missiles.
Over the years the US military forces have been armed with a wide variety of missiles. From the air-to-air Sidewinder to the towering Titan II Intercontinental Ballistic Missile, unmanned rockets of countless shapes and sizes have been developed to meet any strategic commitment. This kit includes parts to assemble a 1/128 scale display of 36 missiles used by the US Army, Navy and Air Force during the 1960s. It includes a display base with the name of each missile moulded in position, two scale figures, and a decal sheet with authentic markings.
Ltd Reissue
Brand: Atlantis
Product Code: AMCM6871
Availability: New
Scale:1:128
Monarch 100th Annniversary Ltd Issue NOSFERATU
Nosferatu comes in an oversize box 17" long with an uncut parts sprue.
Reissue of the original Nosferatu kit from Monarch Models. Kit is 1:8 scale and comes with base. Moulded in Ghoulish Green plastic and kit parts are on unclipped sprue, sealed in plastic bag. Packaged in a large, oversize box. Like other Monarch kits, this will have a limited run. Monarch says this is the last time this kit will be produced.
Very Limited Re-issue of only 1000 kits.
(Box 17" Long) New in stock!!
X-Plus 1/8 Maria Plastic Model Kit Silver Screen (Metropolis)
Only a few left!
X-Plus 1/8 Maria Plastic Model Kit Silver Screen (Metropolis)
The silent film "Metropolis," directed by Fritz Lang and released in 1927, a pioneering science fiction movie, is one of the first full-length films in the genre; in 2001, this film became the first film added to UNESCO's Memory of the World Register. Maria, the mechanical human created by the scientist Rotwang in the film, is one of the first and most iconic robots ever depicted on the silver screen -- and now X Plus brings us an amazing model kit of Maria for your own collection! This kit depicts Maria standing in front of a chair in a memorable pose from the film. This version of the kit is moulded in silver. Order this truly iconic character for your own collection today!
[Size]: Approximately 26cm tall when completed (Maria about 22cm tall, base about 4cm tall)
[Materials]: HIPS
[Mould Colour]: Silver, clear, dark grey
New in stock!
Star Wars Bad Batch - Havoc Marauder - 1:144 scale from Round 2/AMT
Only a few left!
Star Wars Bad Batch - Havoc Marauder - 1:144 scale from Round 2/AMT
The Havoc Marauder as featured in Star Wars the Bad Batch animated series. This all new models is 1:144 scale with movable wings. It can be displayed in flight or with landing gear. Includes clear parts. Based on the studio CAD files. This has 10 inch wingspan!
New In Stock!
Monarch Glow in the Dark The Fly 1/8th kit
Monarch Glow in the Dark The Fly 1/8th kit
Glow in the Dark version of the kit from Monarch Models. All new plastic model kit from Monarch Models. Kit is 1:8 scale and comes with base and lab equipment. Like other Monarch kits, this will have a limited run.
New in stock!
1612 Commander John Koenig in Spacesuit and A.L.P Laser Cannon
Only a few left!
SPACE: 1999 COMMANDER JOHN KOENIG SPECIAL EDITION IN ALPHA SPACESUIT WITH ALP LASER RIFLE
COMMANDER JOHN KOENIG IN MOONBASE ALPHA SPACESUIT
STUNNING CHARACTER LIKENESS
FULL ARTICULATION FOR MAXIMUM POSE-ABILITY
HIGHLY DETAILED COMLOCK AND STUN GUN ACCESSORIES
DETACHABLE SPACE HELMET WITH HINGED VISOR
FEATURING SPECIAL EDITION APL LASER RIFLE ACCESSORY
CHARACTER DISPLAY STAND WITH TWO PHOTOGRAPHIC BACKDROPS
LIMITED EDITION ONLY 2000 WORLDWIDE
Now In Stock.
1612 CONTOLLER PAUL MORROW IN CLASSIC ALPHA SPACESUIT
1612 CONTOLLER PAUL MORROW IN CLASSIC ALPHA SPACESUIT
1:12 SPACE:1999 Paul Morrow in Spacesuit with Probe Capsule and Display Base
Stunning likeness
Detachable helmet
Full articulated
Highly detailed stun gun and comlock accessories
Ariel Probe Capsule
Display stand
Limited Edition 3000pcs
FEATURED IN SEASON ONE EPISODE THE LAST SUNSET.
FEATURING ARIEL PROBE.
Special Price: £25.00 (Less than Half-Price!!)
1612 PROFESSOR VICTOR BERGMAN IN CLASSIC ALPHA SPACESUIT
1612 PROFESSOR VICTOR BERGMAN IN CLASSIC ALPHA SPACESUIT
FEATURING HAND HELD SPECTRO-X-SCANNER
1:12 SPACE:1999 Professor Bergman in Spacesuit with Scanner and Display Base Stunning likeness
Detachable helmet
Full articulated
Highly detailed stun gun and comlock accessories
Handheld Spectro-X Scanner
Display stand
Limited Edition 3000pcs
Special Price £25.00 (Less than Half-Price!!)
MPC 1:72 14" Space:1999 Eagle 4 featuring Lab Pod & Spine Booster
Only a few left!
1:72 14" Space:1999 Eagle 4 Featuring Lab Pod & Spine Booster
The opener to season two of Space:1999 introduced this fan-favorite variation of the Eagle Transporter. MPC builds onto its lineup of 14” Eagles by adding the popular “laboratory pod” along with the powerful spine booster.
As with all of MPC’s Space:1999 kits, the kit supplies an amazing amount of detail that is based on extensive research of the original filming miniatures used in the production of the show.
The kit comes with an extensive water-slide decal sheet, a full-colour deco guide, and assembly instructions.
Features:
1:72 scale, skill level 2, paint & glue required
209 parts
Moulded in “Eagle” white
Assembled scale: 14” inches long
NEW IN STOCK!
Product Code: MPC979 (Special Price £90 Saving £19.95)
X-PLUS Vampirella 2.0 KIT 1/8th.
Only a few left!
X-PLUS Vampirella 2.0 KIT 1/8th.
Be transfixed by Vampirella’ s commanding gaze in this finely detailed model based on José González’s work.
First designed by José González in 1969 and later in September 1972’s Super Special Issue, one of the many collected annuals of Vampirella,
the work also marked the introduction of Carol de Haro as the real life model for Vampirella, appearing on covers and in comic strips throughout the 70’s.
Now, taking the striking image that José González is best known for, X PLUS has created the pose in immaculate detail,
from the individual strands of hair and subtle musculature, to the signature vampire bat perched atop Vampirella’s outstretched, delicate hand.
As a welcome embellishment, Vampirella has an entirely new, but particularly thematic base to stand upon.
A mound of bones and skulls rest at her feet. Upon closer inspection, fans may notice that these aren’t human skulls,
but ones belonging to fellow vampires, with the telltale hint of fangs on each.
New in stock!. Flown in from Japan!!
Wave S.A.F.S. Mk.III Assault Type A8/R8 1:20th.
Wave brings us an awesome model kit of the S.A.F.S. Mk.III assault type A8/R8! The S.A.F.S. lost its superiority against the Strahl Army's armoured combat suits, requiring an increase in power output and the addition of heavy armour. The S.A.F.S. Mk.III A8/R8 has a bore-up engine and armoured front and rear engine parts. This model kit snaps together so glue isn't needed, and polycap joints give it pose ability; a detonation cord is also included, as are decals for its markings.
New in stock!
Recovery Vehicle
Only a few left!
UNCL Recovery Vehicle
Thunderbirds Recovery Vehicle model kit from UNCL Models. Limited edition re-issue for a very limited production run. It measures 10" long once assembled and features superb detail and accurate tooling. Also includes illustrated colour instruction sheet and high quality decals..
Now upgraded with revised tracks.
Back in stock
D&H GUILLOTINE (Ex Aurora) 1/8th scale
Only a few left!
New in stock.
Polar Lights Galileo Shuttlecraft (WITH INTERIOR) POL995
Only a few left!
NEW: Galileo Shuttle with Interior (Complete Kit) 1/32 scale from Polar Lights/Round 2
THIS NEW KIT NOW INCLUDES FULL INTERIOR DETAIL INCLUDING BURKE CHAIRS, DASHBOARD CONTROL PANELS AND MORE...
THESE ARE THE VOYAGES: The Galileo Shuttle was the Enterprise crew’s method of short distance travel on short jaunts through the galaxy.
ALL THE FEATURES: This model kit presents fine detail and is based on intense scrutiny of the filming miniatures and set pieces used during the production of the Star Trek: The Original series TV show.
GET INSIDE: This release includes all-new parts to provide a full interior of the kit and includes everything from the command console to the utility room along with seven seated crew figures featuring the main cast of characters.
QUICK SPECS: 1/32 Scale. 160 Parts. 11” long. Moulded in grey with clear parts water-slide decals and assembly instructions. Skill level 2 – Suggested for modellers age 14+ PAINT AND GLUE REQUIRED.
THE PERFECT PRESENT: Don't know what to get dad for his birthday? Or maybe you have an avid hobbyist or collector in your life. This model kit makes an ideal gift for any occasion!
ALL-NEW space ship model kit: Scale-modelling is a great hobby that provides a great looking display that you build yourself. This 1/32 scale Galileo shuttle plastic assembly kit presents the shuttlecraft featured in STAR TREK: THE ORIGINAL SERIES. This precision-moulded kit is based on the set and miniature model used in the show!
Precision fit: This model is created from all-new tooling for excellent fit and presents a fun building experience. The model is 11” long when completed and rests on detailed landing gear. It also features an open equipment hatch and other details.
Eye-catching packaging: The kit’s eye-catching packaging is great to display on the shelf next to your finished model. The kit’s 53 parts are moulded in grey plastic with clear parts. It features a full-colour decoration guide and all Polar Lights model kits include a pictorial instruction sheet to assist assembly.
This all new model kit from polar lights is about 11 inches long and comes with a decal sheets with multiple shuttle names so you can create any number of versions from the show. This is the most accurate Shuttle model kit to date. It has built in space between panels for lighting
SAVE £25.00 - RRP £115.00 Our Price £90.00!!
Back in stock!
MPC 1:25 Monkeemobile TV Car (re-Issue)
MPC 1:25 Monkeemobile TV Car
The Monkeemobile is a modified Pontiac GTO that was designed and built in 1966 by designer Dean Jeffries for a new TV show called “The Monkeesâ€. Jim Wangers from the Promotional Department at Pontiac supplied two base 389 4-barrel 1966 GTO convertibles with automatic-transmissions to be converted into Monkeemobiles. The car features a tilted forward split two-piece windshield, a touring car convertible top, modified rear quarter panels and front fenders, exaggerated tail lamps, set of four bucket seats and an extra third row bench where there was originally a trunk, a rear-mounted parachute and a GTO emblem on the front grille.
Product Code: MPC996
NEW IN STOCK
AMT 1:1400 U.S.S. ENTERPRISE NCC-1701-C (Clear Edition)
Only a few left!
1:1400 Star Trek U.S.S. Enterprise NCC-1701-C
This 1/1400 scale U.S.S. Enterprise NCC-1701-C plastic assembly kit presents the predecessor to the U.S.S. Enterprise NCC-1701-D as seen in Star Trek: The Next Generation episode “Yesterday’s Enterprise”. Add it to your collection today! The U.S.S. Enterprise NCC-1701-C kit is injected in clear plastic making it perfect for lighting. The kit also includes hull markings for U.S.S. Enterprise NCC-1701-C and U.S.S. Yamaguchi NCC-26510, battle damage decals, and all new packaging. Lighting kit not included.
Features:
1:1400 scale, skill level 2, paint & glue required
Moulded in clear
Dome base and metal support rod
Built scale: 15 inches long
Decals included for U.S.S. Enterprise C + U.S.S. Yamaguchi (Battle Damaged decals).
Product Code: AMT1332
Star Ace Toys 30cm Skeleton Army ( Normal Ver. ) SA9051
Only a few left!
Stop motion master, Ray Harryhausen, pitted the noble heroes against animated skeletons in several of his movies. Ray’s skeletons provide a creepy, and sometimes funny villain that makes for a great action scene.
Star Ace has re-created Harryhausen’s skeletons, known as “Children of the Hydra’s teeth”, as a 1/6 scale polyresin statue, armed with sword and shield, ready to take on any hero. The skeleton comes with a rocky terrain base with real grass effects. Get multiple statues to create your own skeleton army!
-Size : Approximately L 150mm W 100mm H 320mm
-30cm Statue with Diorama
New In Stock!
Star Ace 30cm Skeleton Army (Deluxe ver.)
Only a few left!
Star Ace 30cm Skeleton Army (Deluxe ver.)
Skeleton Army (Children of the Hydra's Teeth) Deluxe Statue Ray Harryhausens 30 cm.
Stop motion master, Ray Harryhausen, pitted the noble heroes against animated skeletons in several of his movies.
Ray’s skeletons provide a creepy, and sometimes funny villain that makes for a great action scene.
Star Ace has re-created Harryhausen’s skeletons, known as “The Children of the Hydra’s Teeth”, as a 1/6 scale polyresin statue,
armed with sword and shield, ready to take on any hero. The skeleton comes with a rocky terrain base with real grass effects. Get multiple statues to create your own skeleton army!
This Deluxe version of this statue includes a larger base with two more skeletons rising out of the ground, ready to do battle. This is ltd ed of 800 pcs
NEW IN STOCK!
STAR ACE Valley of the GWANGI Rhedosaurus Soft Vinyl Kit
Only a few left!
New release from Star Ace the Gwangi from Valley of the Gwangi.
32CM TALL SOFT VINYL KIT
In celebration of the 100th Anniversary of the master of movie stop motion animation, Ray Harryhausen.
Star Ace is proud to release the Rhedosaurus, a vicious ancient creature unleased in the modern day.
Traditionally sculpted by the artisans of the famed creature shop of Kaibutsuya, this detailed statue of Gwangi is modelled
on the puppet created by famed stop-motion animator Ray Harryhausen.
NEW IN STOCK.
This model kit is a limited edition of 400 pcs
1:350 2001: Space Clipper Orion
Only a few left!
1:350 2001: Space Clipper Orion
The Orion III Space Clipper is a luxury commercial space transport, carrying passengers from Earth to orbiting space facilities. A stremalined, needle-like design ensures smooth atmospheric flight capability, while precise, computer assisted navigation control allows mathematically complex docking and landing operations.
Brand: Moebius Models
Product Code: MMK2001-12
New In Stock!
Moebius 1/72nd (29" Long ) ORION Space Clipper
Only a few left!
1:72 2001: Space Clipper Orion (29" Long)
The Orion III Space Clipper is a luxury commercial space transport, carrying passengers from Earth to orbiting space facilities. A streamlined, needle-like design ensures smooth atmospheric flight capability, while precise, computer assisted navigation control allows mathematically complex docking and landing operations.
Picture shows Test Shot together with 1/144th scale version..
Brand: Moebius Models
Product Code: MMK2001-11
Big Saving Ony £199.95 - Saving £55.00!!
RAZOR CREST 1/72nd (The Mandalorian) AMT1237
Only a few left!
AMT 1/72nd RAZOR CREST from Star Wars The Mandalorian.
An all new Star Wars kit from Round 2! The Razor Crest is featured in The Mandalorian series on Disney+. This is a 1:72 scale model, which is 14 to 15 inches long.
Include Opening Cargo Doors - Retractable Undercarriage & Figures of The Mandalorian & Grogu
New Stock arriving 6/8th April 2023.
Hasegawa 1:72 TR-5 HARPY NERO - CRUSHER JOE
Only a few left!
Features:
Category : Space Fighter (Animation)
The canopy can be opened or closed.
The legs can be parked or flying mode.
The stand allows you to display in flight.
Additional plastic parts: Pilot (Blue Beard Nero)
Box size : Same size as CW22 (200 x 350 x 65)
Estimated No. of parts : 95
Base kit : CW22(64522) - Regular item in 2022 + new pilot figure parts L (NERO)
Model size : L : 225.5 mm x W : 153.5 mm
Kit features : It is appeared on very popular Japanese animation "CRUSHER JOE".
Brand: Hasegawa
Product Code: HA64792
New Now Available.
1:2500 CAPTAIN HARLOCK BATTLESHIP ARCADIA - FIRST SHIP
Only a few left!
1:2500 Captain Harlock Space Pirate Dimension Voyage Battleship Arcadia - First Ship
The first ship of the dimensional voyage version will be made into a kit in 1:2500 scale.
Features:
Category :Space Pirate Battleship of Japanese cartoon (Fantasy)
Box size :Same size as CW20 (190 x 340 x 50)
Estimated No. of parts :109
Base kit :CW20(64520) - Regular item in 2022 + new skull mark parts K
Model size :L : 226.5 mm x W : 100 mm
Markings :Same as 64724
New Now Available.
WAVE Gustav Ma.K. 40th Anniversary Limited Edition Display Model: 1/16th Scale
Only a few left!
A limited edition product is now available from Seiji Nuke to commemorate the 40th anniversary of [Maschinen Krieger]!
A limited edition will be available for the popular painted finished product [1/16 Gustav].
The colour image has changed significantly by putting the whole thing in dark grey and adding orange markings to the upper body.
This orange marking is a special specification that changes colour depending on the temperature.
In addition, marks and aircraft numbers commemorating the 40th anniversary are marked in various places by tampo printing, giving the appearance an accent as a limited edition.
In addition to the movement of the joints of each part common to the series, the contents of the normal version such as the characteristic joint sealing cloth material, the LED light emission gimmick of the abdominal sensor, and the reproduction of the hatch open mechanism are inherited as they are.
In addition, the modeller comes with 3 nice decals (1 new, 2 common to the regular version).
This product is a 40th anniversary limited edition product, so it will be a made-to-order product for this time only.
Don't miss this opportunity!
Scale: 1/16 scale
Overall height approx. 140 mm * Not including antenna
Product specifications: Painted finished product model
VERY Ltd -NEW IN STOCK!
X-Plus, Star Ace Allosaurus from One Million Years BC. Vinyl Kit
Only a few left!
One Million Years B.C. Allosaurus Soft Vinyl Model Kit
BY X-PLUS , STAR ACE - BRAND ONE MILLION YEARS B.C.
Add to your Ray Harryhausen collection with this Allosaurus model kit! This model kit is made of softy vinyl and will stand nearly 12 inches tall when complete.
Product Features
11.81 inches (30cm)
Made of vinyl
From One Million Years B.C.
Part of Ray Harryhausen's 100 Year Anniversary series
Highly detailed
Articulated jaw .
NEW IN STOCK!!
STAR ACE 30CM GWANGI (RAY HARRYHAUSEN) SOFT VINYL STATUE DELUXE VER SA9036
Only a few left!
STAR ACE 30CM GWANGI (RAY HARRYHAUSEN) SOFT VINYL STATUE DELUXE VER SA9036
Trapped in a hidden valley for millions of years, the allosaurus called Gwangi is one of the most fearsome beasts the wild west has ever seen.
Traditionally sculpted by the artisans of the famed creature shop of Kaibutsuya, this detailed statue of Gwangi is modeled on the puppet created by famed stop-motion animator Ray Harryhausen. Each hand-painted piece is made from soft vinyl and stands 30 cm tall.
The Deluxe version of this statue includes a polyresin display diorama base with a dead Pteranodon and a dismembered wing that can be displayed in Gwangi’s mouth.
Future Fleets 1/1200th scale Waterline Movie Seaview
Only a few left!
Future Fleets 1/1200th scale Waterline Movie Seaview
Seaview is a 1/1200 scale waterline resin model of a nuclear powered, Polaris armed submarine model from the 1961 film "Voyage to the Bottom of the Sea" by the new maker Future Fleets no.001. The model is fully-finished and painted in neutral grey and lightly weathered.
The waterline 1/1200 scale model of Seaview, which measures approx 145mm represents the super-submarine as she appeared in the 1961 film and first season of the television series.
A full hull model and a model surfacing at the North Pole will also be available.
Comes with it's own protective packaging. The seascape base is not included.
Please Note: This item is to order only - Delivery 8-12 days!
Future Fleets Seaview Arctic Diorama FF002
Only a few left!
Future Fleets Seaview Arctic Diorama FF002
Seaview is a 1/1200 scale waterline resin model of a nuclear powered, Polaris armed submarine model from the 1961 film "Voyage to the Bottom of the Sea" and TV Series Season 1, by the new maker Future Fleets no.002. The model is fully-finished and painted in neutral grey and lightly weathered.
Seaview surfacing at the North Pole is a 1/1200 waterline diorama model comprising a blue sea base measuring 150mm x 150mm, on which seven melting icebergs, together with the submarine. The breaching submarine and the icebergs are all separately poseable on the base.
A full hull model will also be available shortly.
Comes with it's own protective packaging.
Made To Order - Please Allow 10-12 Days for Delivery
X-Plus Dynamite Vampirella 1/8 scale
X-Plus Dynamite Vampirella 1/8 scale
All new plastic model kit from X-Plus. Kit is 1:8 scale and comes with graveyard base. Photo shows prototype.
The X Plus Plastic Model series has begun! Out of a deep respect for the legendary “Aurora Plastic Company,” X-Plus has decided to bring back a new line of plastic model kits that still somehow takes you back to the old days.
The first in the series is the famous comic queen “Vampirella,” illustrated by many different artists over the past fifty years, thanks to her enduring popularity. This 1/8 scale model features the comic queen striking a pose based on Aurora’s box art for the 1/13 scale plastic model of Vampirella. The base includes a tomb stone and two bats inspired by her origin story as a vampire.
Now Back In Stock!!
Moebius 1:8 LYNDA CARTER AS WONDER WOMAN
Only a few left!
1:8th TV Wonder Woman - Lynda Carter
Lydna Carter in an early post bouncing bullets off her bracelets. Complete with base, golden lasso (optional poses) and skirt (optional)
Paint and glue needed for final assembly.
Brand: Moebius Models
Product Code: MMK973
SOLD OUT - New Supplies July 14th - Advance Orders Welcome!!